Simix Ceramic Car Coating
Menu

How to apply Simix Multi-Surface Ceramic Coating to
cars, boats, RVs and motorcycles

Applying Simix Multi-Surface Ceramic Coating to cars, boats and RVs is simple.

But, you need to make sure you follow our steps exactly.


EXTERIOR and INTERIOR

Prep Product
  1. Shake gallon well. Product must be diluted 1:1 with water. For easier handling, pour desired amount into clean, new smaller container, then add water.
  2. Shake mixture well.

Prep Surface
  1. Thoroughly clean and remove any visible surface contaminants.
  2. Clay bar if needed.
  3. Do any needed paint correction.

Apply
  1. Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water.
  2. Apply product onto the surface with a vertical and horizontal motion.
  3. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed.
Print out instructions
GLASS AND MIRRORS

Prep Product
  1. Dilution rate is 4 parts water to 1 part coating.
  2. Pour water into clean, new spray bottle first.
  3. Add coating and shake.

Prep Surface
  1. Thoroughly clean surface.​

Apply
  1. Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water. Spray mixture to dampened cloth or sponge.
  2. Apply product onto the surface with a vertical and horizontal motion.
  3. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed.

Note: You can spray directly onto surface. 
Any overspray must also be dry buffed.

Simix USA

simixusa.com
© COPYRIGHT 2015. ALL RIGHTS RESERVED.
  • Home
  • How to Apply
  • Shop
  • About
  • Contact
  • Ceramic Coating
  • SDS
  • Home
  • How to Apply
  • Shop
  • About
  • Contact
  • Ceramic Coating
  • SDS